800kw Kaplan Turbine Micro Hydro Generator For Micro Power Plant
overview
Kaplan turbine also known as axial flow Turbine is developed in 1913 by the Austrian professor Kaplan.Its invention allowed efficient power production in low-head applications that was not possible with Francis turbines.The feature of Kaplan turbine is the water flow passes through the runner axially.Kaplan turbines are widely used throughout the world for electrical power production. They cover the lowest head hydro sites and are especially suited for high flow conditions.Kaplan turbine is a kind of turbine suit to low water head 2-50 meters, and with certain big flow, normally divided into fixed blades and adjustable blades turbine. Main components including: runner, draft cone, water chamber, guide vane, bearing, and main shaft. The spiral case could be steel or concrete. The runner diameter we can manufacture is from 60cm to 4meters, with rated output 50Kw to 20Mw.
Turbine units normally be vertical shaft arrangement. Generator equipped with same or different shaft, with Anyway, they will share the same rotating speed. If specially required, a speed increase gear could be equipped between turbine and generator in order to smaller the generator size.
advantage
The Axial water turbine((Kaplan)) is suitable for low and medium heads from 2 to 30 meters.
The runner blades are fixed or adjustable.
The fixed blade propeller water turbine is used for medium and small sites with small variation of head and load, and the Kaplan turbine is used for medium and large sites with large variation of head and load.
Kaplan turbine is the most widely used water turbine for low head run-off-rive small (200KW-3000KW) hydro power plant with its simple structure and big flow discharge capacity.
Specification
| Name | 800kw Kaplan Turbine Micro Hydro Generator |
| Water Head | 19.0m |
| Runner Diameters | 1.1 m |
| Capacity2 | 800KW |
| Frequency | 50HZ |
| Generator Voltage | 400V |
| Layout pattern | vertical |
| Material(blades) | Stainless Steel ZG0Cr13Ni4Mo |
| Excitation | Brushless |
| Generator Insulation | F/F |
| Lifespan | 50 years |
Why choose us?
1. More than 20 years of industry experience, install commissioning more than 150 equipment each year
2. Provide complete proposal for hydro power plant from water to wire
3. Abundant foreign power plant project implementation experience such as France, Japan, USA, South Africa, Sri Lanka, Iran, Southeast Asia
4. Design and manufacture of hydro power generator with voltage 400V,6.3KV . capacity exceed 1000kw with 400V
FAQ
1.You are a trading company or a manufacture?
We are a hydro turbine generator manufacture with over 20 years of experiences, Our factory is in the Sichuan you will take 2 hours driving after you reach Shuangliu Airport, pay a visit to our factory you will know more about us.
2.What Kind of water turbine should I choose?
We need to know water head, flow rate, voltage level, frequency, on-grid or off-grid running, automation level from you to work out the solution
3: Can you do the EPC for the hydro power plant?
Yes, We can design, producing and install the equipment, we will dispatch technologist and workers to install the equipment.
Product Tags:
|
|
800kw Micro Kaplan Hydro Turbine For Low Medium Heads 2m-30m Images
|
